i3-TECHNOLOGIES L3503W User Manual page 76

WARNING
This projector is a Class 2 laser device that conforms with IEC 60825-1:2007 and CFR
•
1040.10 and 1040.11.
Class 2 laser product, Do Not Stare Into Beam.
•
This projector has built-in Class 4 laser module. Disassembly or modification is very
•
dangerous and should never be attempted.
Any operation or adjustment not specifically instructed by the user's guide creates the risk
•
of hazardous laser radiation exposure.
Do not open or disassemble the projector as this may cause damage by the exposure of
•
laser radiation.
Do not stare into beam when the projector is on. The bright light may result in permanent
•
eye damage.
Without following the control, adjustment or operation procedure may cause damage by
•
the exposure of laser radiation.
Adequate instructions for assembly, operation, and maintenance, including clear warnings
•
concerning precautions to avoid possible exposure to laser and collateral radiation in excess
of the accessible emission limits in Class 2.
76
Appendices