i3-TECHNOLOGIES L3503W User Manual page 49

2. When making WI-FI connection between your computer and the projector
Step 1: Setup the WiFi connection
Insert a WiFi dongle (optional/accessory) in the USB socket in the projector.
•
Go to Input → Multimedia → Settings → WiFi.
•
Define SSID/AP name and password in the AP settings menu. Note! The password must be
•
minimum 8 characters. Press exit on the remote control to exit the virtual keyboard to be able
to save the settings.
You are now ready to connect your wireless device directly to the projector (AP mode).
•
If you want to connect via a WiFi network (client mode) you must connect the projector and
•
the wireless device to a common WiFi network and ensure that the network allows connected
units to see each other.
Turn ON the AP list to see available wireless networks (Client mode only).
•
Connect the projector to the desired wireless network (Client mode only).
•
Exit Settings
•
AP Mode
Step 2: Connect to the projector (AP Mode only)
Go to Input → Multimedia → Mobile/Tablet or Laptop (depending on device)
•
On your mobile/tablet or laptop: Open the list of available wireless networks and connect to
•
the listed AP using the displayed password.
Device: Tablet
Samrt Phone Laptop
PC
Client Mode
Device: Tablet/Samrt Phone/Laptop/PC
User Controls