Table of Contents
Advertisement
Quick Links
Instruction Manual
EXT
10MHZ ALARM
POWER
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 2115-122
Block Upconverter
MODEL 2115
UPCONVERTER
C
ROSS
May 2009 Rev 0
T
ECHNOLOGIES INC.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cross Technologies 2115-122
Summary of Contents for Cross Technologies 2115-122
- Page 1 POWER Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
-
Page 2: Table Of Contents
All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages. -
Page 3: General
1.0 General 1.1 Equipment Description The 2115-122 Block Upconverter converts 0.95 - 1.45 GHz to 12.2 - 12.7 GHz with low phase noise and flat frequency response. Frequency translation is via a 11.25 GHz local oscillator. Front panel LEDs provide indication of DC Power, External 10 MHz, and PLL Alarm. -
Page 4: Technical Characteristics
1.2 Technical Characteristics TABLE 1.0 2115-122 Upconverter Specifications* Input Characteristics Impedance/Return Loss 50 Ω /14 dB Frequency 0.95 to 1.45 GHz Noise Figure, max. 20 dB, max gain Input Level -40 to -20 dBm Input 1dB Compression -10 dBm Output Characteristics Impedance/Return Loss 50 Ω/14 dB... -
Page 5: Installation
2.1 Mechanical The 2115-122 consists of a PCB and an RF assembly housed in a 1 RU (1 3/4 inch high) by 12 inch deep chassis. A switching, ± 12, +24, +5 VDC power supply provides power for the assemblies. The 2115-122 can be secured to a rack using the 4 holes on the front panel. -
Page 6: Front Panel Indicators
AC power supply. MODEL 2115 UPCONVERTER ROSS ECHNOLOGIES INC. ALARM POWER 10MHZ DS2 - ALARM LED Lights RED when PLL comes out of lock. FIGURE 2.2 2115-122 Front Panel Controls and Indicators 2115-122 Manual, Rev. 0 Page 6 5/04/09... -
Page 7: Operation
2.4 Installation / Operation 2.4.1 Installing and Operating the 2115-122 Upconverter 1. Connect a -20 dBm to -5 dBm 0.95 to 1.45 GHz signal to L-BAND INPUT, J1 (Figure 2.1). 2. Connect the RF OUTPUT, J101, to the external equipment. - Page 8 G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2115-122 Manual, Rev. 0 Page 8 5/04/09...
-
Page 9: Shiloh Road Alpharetta, Georgia
ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com 2115-122 Manual, Rev. 0 Page 9 5/04/09...
Need help?
Do you have a question about the 2115-122 and is the answer not in the manual?
Questions and answers