Field Data For Mds And Slg - Siemens SIMATIC SLG D11 Operating Instructions Manual

3.4

Field data for MDS and SLG

Field data of all MDSes and SLGs without influence of metal
The field data of the MDS and SLG are shown in the table below. The technical
specifications listed below are typical data and apply at an ambient temperature
● of 0...+55 °C for SLG D11/D11S
● of 0...+70 °C for ANT D2
Tolerances of ±20% are admissible due to production and temperature conditions.
Table 3- 3
SLG D11 ANT D2
SLG D11S ANT D2
SLG D11 ANT D2
SLG D11S ANT D2
SLG D11 ANT D2
SLG D11S ANT D2
SLG D11 ANT D2
SLG D11S ANT D2
Green
Blue
Figure 3-1
SLG D11/D11S with ANT D2
Siemens Industrial
Operating Instructions, 08/2008, A5E02142372-02
Field data of all MDSes and SLGs – without influence of metal
MDS D124
Length of the transmission window in mm (L)
Median deviation
Operating distance in mm (S
Limit distance in mm (S
Main field (processing field)
Secondary fields
Distance definition
MDS D160
50
(main field) (main field)
20
)
a
30...50
)
lim
60
3.4 Field data for MDS and SLG
MDS D324
50
(main field)
20
35...55 35...60
65
ANT D2
50
20
70
17