Table of Contents
Advertisement
SLG D11S
2.4 FCC and IC information
MTBF
Degree of protection to EN 60529
Shock resistant to EN 60721-3-7,
Class 7M2
Total shock response spectrum,
Type II
Vibration resistance in accordance
with EN 60721-3-7, Class 7M2
Weight, approx.
Approvals
2.4
FCC and IC information
FCC information
Siemens MOBY D SLG D11S
FCC ID: NXW-MOBYD-SLGD11
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.
Note
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
changes and modifications to this equipment:
Such modifications could void the user's authority to operate the equipment.
IC information
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb.
This device has been designed to operate with only the antennas as described in this
manual. Use of further antennas is strictly prohibited per regulations of Industry Canada. The
required antenna impedance is 50 ohms.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
12
2.0 x 10
hours
5
IP65 (UL: For indoor use only)
30 g
1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz)
600 g
CE
•
FCC
•
IC
•
Harmless to heart pacemakers
•
UL 60950
•
Operating Instructions, 08/2008, A5E02142372-02
SLG D11/D11S with ANT D2
Advertisement
Table of Contents
