Acroprint timeQplus TQ600 User Manual page 34

1:N Verification ("One to Many" Verification)
In this mode, a user simply takes a fingerprint reading. The TQ600
compares their fingerprint to all of the fingerprint templates stored
in the terminal.
verification. The verification time is dependent on the number of
fingerprint templates stored in the terminal.
1) Place finger on the sensor surface, the following appears:
2) It continues for about 0.5 seconds. If the test is successful, the
following appears:
3) If your identity cannot be verified, you are prompted to try
again, the following appears:
It continues for about 0.5 seconds, return to the start-up window.
1:N verification takes more time than 1:1
FP Verify
Remove Finger
Verify
User ID 00001
Verified.
FP Verify
Please Try Agn.
- 26 -