Table of Contents
Advertisement
Wood Stud Installation
1
1. Use a stud finder to determine the wall studs in
the vicinity of the mount.
2. Use a pencil to mark each of the wall studs.
3
Drill a pilot hole using a M6 or 1/4" drill bit on the
stud that was marked on the upper right.
www.planar.com | North America Toll Free: 1-886-475-2627 | Direct: 1-503-748-1100
998-0368-00 - VMT-MXL
2
Use a pencil to mark the upper right mounting location
of the wall stud.
4
1. Place the mount against the wall and align it
with the pilot hole.
2. Insert one (1) 5/16" x 3" lag bolt one (1) 5/16"
washer into the upper right pilot hole.
3. Use a socket wrench and a 1/2" socket to
tighten the lag bolt.
4. Do not over tighten the lag bolt.
Installation Guide
Page 3
Advertisement
Table of Contents
