Table of Contents
Advertisement
998-0368-00 - VMT-MXL
Installation Guide
20
Use the GAPit GO/No Go Gauge (supplied with model specific spacer) as a final step in the process
to inspect and adjust the gap to prevent costly replacement and extend the lifespan of the displays.
Damage happens when weight is transferred to the ultra-thin bezels of video wall installations,
if the recommended gap specifications of .050" is not maintained vertically and horizontally.
This results in image distortion, and costly repairs and replacement
Page 12
www.planar.com | North America Toll Free: 1-886-475-2627 | Direct: 1-503-748-1100
1. Swipe GAPit along vertical gap
2. Inspect for .050" gap & adjust if
needed
3. Swipe GAPit along horizontal gap
4. Inspect for .050" gap & adjust if
needed
Advertisement
Table of Contents
