Table of Contents
Advertisement
21
Servicing
1. Push evenly in the front of the VMT-MXL to release
the single latch spring lock (Figure 1).
2. Slowly pull the front of the VMT-MXL to extend the
scissor arms (Figure 2).
3. Loosen the locking safety screws on both mounting
brackets.
4. Tilt up the bottom of the flat-panel, then set their
kickstands against the bottom tubing of the mount
(Figures 2 & 3).
5. Perform any neccessary repairs. Close the latch
after servicing.
www.planar.com | North America Toll Free: 1-886-475-2627 | Direct: 1-503-748-1100
998-0368-00 - VMT-MXL
Figure 1
Single Latch Spring Lock
Figure 2
Figure 3
Installation Guide
Page 13
Advertisement
Table of Contents
