JVC DLA-HD2KE Service Manual page 21

ADJUSTMENT
(9) On the [DDIC Control][Flat Field] tag, set the Flat Field Level value for a color to be adjusted to 512 and the rest to 0,
respectively. Refer to Fig.3.
(9)Enter 512.
(10) In the [DDIC Control][EVR] tag, find the point by sliding a CC slider (CC_R for red, CC_G for green and CC_B for blue) where
the photo-sensor waveform becomes minimum .
Refer to Fig.4.
(11) Perform the above procedures (9) and (10) for all colors, R, G, and B.
Adjust here
Fig.3
Fig.4
(No.PA019)1-21