Updating Firmware - Teledyne T3AFG5 Series User Manual

2.14. Updating Firmware

Using USB flash drive to update firmware
The software of the generator can be updated directly via USB flash drive.
This process takes about two minutes. Follow the next steps:
1. Insert USB flash drive with firmware procedure to USB host interface on
the front panel of the generator.
2. Press the Utility button to enter the 'Utility Menu'.
3. Press '1/3' option button to enter the third page of 'Utility Menu'.
4. Press the 'Update' option button.
5. Press 'Browser' option button to select 'Directory', then select the 'USB
Device (A:)' through direction key.
6. Press 'Browser' option button to select 'File', then select the
'XXXX.ADS' file using the direction keys.
7. Press the 'Recall' option button to update.
8. After finishing the update, restart the generator.
Note: Don't disconnect the power whilst the generator is being updated.
81