To Set Pulse Signals - Teledyne T3AFG5 Series User Manual

2.4. To Set Pulse Signals

Press Pulse button to call the pulse operation. The pulse waveform
parameters are set by using the pulse operation menu.
The parameters for pulse waveforms are: frequency/period, amplitude/high
level, offset/low level, pulse width/Duty and Rise/Fall. As is shown in Figure
2- 12, in the soft key menu, select PulWidth. Cursor is located in the pulse
width parameter area in the parameter display window, and users can set the
pulse width value here.
Figure 2- 12 Pulse Parameter Display Interface
29