To Set A Waveform - Teledyne T3AFG5 Series User Manual

1.4. To Set a Waveform

On the operation panel, there is a set of buttons with waveform icon. See
Figure 1- 6. The exercise below will help you familiarize with the waveform
selection settings.
1. Press Sine button and the waveform window will display sine waveform.
T3AFG5-10 Series Generator can generate sine signal with a frequency
from 1μHz to 30MHz. By setting frequency/period, amplitude/high level,
offset/low level, sine signal with different parameters can be generated.
Figure 1- 6 Waveform Selection Buttons
Figure 1- 7 Sine Signal Display Interface
7