Bosch GCM 12 GDL Professional Original Instructions Manual page 18

18 | English
Symbols and their Meaning
When transporting the power tool,
hold it only at the locations indicated
(recessed handles) or by the transport
handle.
Never carry the power tool using the
handle of the glide arm.
Switching on the laser
Clamping handle open:
Bevel angles can be adjusted.
Clamping handle closed:
The set bevel angle of the glide arm is
locked.
Indicates the individual steps for ad-
justing the bevel angle.
1. Loosen the clamping handle
2. Swivel the glide arm slightly to the
left
3. Set the required bevel angle range
using the rotary knob
Setting the bevel angle ranges using
the rotary knob:
Saw blade inclination to the left (45° to
0°)
Saw blade inclination to the right (0° to
45°)
Entire swivel range of the glide arm
(-47° to +47°)
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
1 609 92A 4CU | (19.09.2018)
Intended use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
(2) Lock-off switch for on/off switch
(3) Protective guard
(4) Retracting blade guard
(5) Adjustable fence
(6) Fence
(7) Saw table extension
(8) Mounting holes
(9) Insert plate
(10) Locking clamp
(11) Locking knob for all mitre angles
(12) Mitre detent lever
(13) Clamping handle for all bevel angles
(14) Detents for standard mitre angles
(15) Recessed handles
(16) Hex key (6 mm/4 mm)
(17) Hex key (24 mm)
(18) Screw clamp
(19) Roller
(20) Angle indicator for right-hand bevel angle range (0°
to 47°)
(21) Chip deflector
(22) Chip ejector
(23) Dust extraction adapter
Glide mechanism clamping lever
(24)
(25) Laser warning label
Laser protection cap
(26)
(27) Glide arm
Depth stop adjusting screw
(28)
(29) Depth stop
Transport safety lock
(30)
(31) Scale for bevel angles
(32) Angle indicator for left-hand bevel angle range (47°
to 0°)
(33) Adjustment knob for 22.5° bevel angle
Bosch Power Tools