Advertisement
Quick Start Guide
1
Slide handle into vacuum base and use
the screw taped to the handle to attach.
1
Remove Dirt Container by pressing the
Tank Release Button.
1
Step gently on base and pull back on
handle to recline.
1
Twist tank cover to the unlock position,
then pull up on the handle.
Go to www.BISSELL.com/support for more information about your product.
Assembly
2
Line tabs on hose cuff to notches on
vacuum. Twist clockwise to lock in place.
Optional Febreze® Filter
2
Lift post-motor filter cover and twist the
tab counter-clockwise to unlock.
Use
2
Adjust the Floor Type Setting LEFT for
high pile carpet or RIGHT for bare floor.
Maintenance
2
Pull down on the pre-motor filter to
remove it from the tank cover.
3
Push handle end into base of vacuum
on opposite side.
3
Remove the post-motor filter and
replace with the Febreze® filter.
3
Push the Lift-Off® button to remove
pod and clean stairs and furniture.
3
48h
All three pieces of the filter are washable.
Dry separately and completely before
returning them to the vacuum.
3
Advertisement
