Adjusting Rear Wheel Height - Invacare Action 3 NG Service Manual

DETAI L "A" Factory Setting

Adjusting Rear Wheel Height

NOTE: For this procedure, refer to FIGURE 5.7.
1. Remove the rear wheel. Refer to Removing/Installing Rear Wheels paragraph.
2. Remove the locknut and washer that secures the axle bracket to the axle plate
3. Align the axle bracket with one of the five adjustment holes on the axle plate.
4. Secure the axle bracket to the axle plate, at the desired height, with the locknut
and washer.
Install the rear wheel. Refer to Removing/Installing Rear Wheels paragraph.
5.
6. Repeat STEPS 1 to 5 for the other rear wheel.
NOTE: Both rear wheels should be set at the same position.
SECTION 5—REAR WHEELS/FRONT CASTERS
Seat Depth =
40 cm +/- 1cm
C
D
FIGURE 5.6 4 Possible Positions of Wheel Plate
3 3
Position A Fixed backrest
Position Recliner backrest
B
A
B
Seat Depth =
45 cm +/- 1 cm