Advertisement
USING THE SPEAKERPHONE
To use your Bluetooth speaker as a speakerphone for receiving a phone call from a Bluetooth enabled
phone.
1.
Following the "pairing your bluetooth device" section to set up the bluetooth connection.
2.
When a call is received during music is playing, music will be muted to hear the ringtone. STATUS
indicator will flash in RED color to indicating the incoming call. Press the
the call, or press the
Button to ignore the call.
NOTE: The voice from the unit will be in "MONO" mode when the Speaker phone is being used
and only the right hand side speaker will sound.
3.
Use the Volume +/- Buttons to adjust the desired volume level.
4.
When the call is completed, press the
function or music playback.
NOTE:
The position of the built-in microphone of the unit is on the central of the front side. You are
recommended to face the front side of the unit and at a short distance in order to have good voice
quality and clarity.
USING THE AUX IN JACK
1.
Plug one end of the audio cable (not included) into the headphone jack of your audio device (or
audio out) and the other end into the AUX IN jack of the unit.
2.
Press and hold the
Button for 2 seconds to turn on the unit (release when blue light appears).
3.
Use your audio device to control music playback and volume through the unit.
4.
Use the Volume +/- Buttons to adjust the desired volume level.
5.
When done listening, press and release the
standby mode) and unplug the audio cable from the unit. Remember to turn off your audio device, too.
NOTE:
Play/Pause control
only works in Bluetooth mode. It does not control the plugged-in device.
When you plug in the AUX cable during Bluetooth playback, the Bluetooth playback will be interrupted
and switched to the AUX mode. After unpluging the AUX cable from the unit, the music may be or
may not be resumed depending on different Bluetooth devices. If the music has been paused on
your device, please restart / resume playback on your device manually. Alternatively, you can restart
Bluetooth playback following the "playing music via Bluetooth" section.
Using audio cable with standard stereo 3.5mm plug (not mono plug).
Button to answer
Button to end the call and resume previous
Button for 2 seconds to turn the unit off (switch to
9
CARE AND MAINTENANCE
PLACING THE UNIT
Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your
furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective
material should be placed between it and the furniture.
CLEANING THE UNIT
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as Benzene, thinner or similar materials can damage the surface of the unit.
10
Advertisement
