Appendix B Setup A Bluetooth Connection - Nedap V-Scan User Manual

Appendix B Setup a Bluetooth connection

The V-Scan Application only communicates with serial COM Ports. The USB connection
automatically generates a COM Port on the PC by the installed drivers. These drivers come
along with the V-Scan Application.
The Bluetooth COM-Port driver software is not included in V-Scan Application
installation software. This driver software is dependent on the manufacturer of your
Bluetooth Device.
Make sure that Bluetooth is switched on in the V-Scan. Settings > System menu
Before the V-Scan can be connected to the PC using Bluetooth, the "Bluetooth Serial Port" must
be installed on the PC. Follow up next steps to setup the "Bluetooth serial Port" .
1. Right mouse button click on the icon in the system tray. Select Advanced Configuration.
2. Open the tab "Local Services". If no Bluetooth Serial Port is listed, click Add Serial Device.
If a Bluetooth Serial Port is listed, start with step 5.
VP5002-300PM-00GB-V-Scan Manual version 2.7 / Page 13