V-Scan Menus; Main Menu; Record Menu - Nedap V-Scan User Manual

3.4. V-Scan menus

3.4.1. Main menu

When in the main screen the OK button is pressed, the database menu appears:
Menu
Animals (0)
Templates (0)
Scan only
Select
Ok
In this menu, the following options can be chosen:
Animals:
-
Templates:
-
Scan only:
-

3.4.2. Record menu

Display record
Item 1 xx
Item 2 xx
Item 3 xx
Item 4 xx
....
Select
The record data is displayed as one field (type) per line. The field name is shown left and the
current value on the right. When the selected field is a user type, the user can edit the value
(except when the user type is a textual type, because the V-Scan does not support entering
text).
To enter a floating point number (e.g. - 20.8): select the field, enter 20, press  key long
(minus sign appears), press  key short (decimal symbol appears), enter 8, press the OK
button to confirm.
Changing a tag number of a record
In order to change the tag number of a record, search or scroll to the record of which the tag
number must be changed and press the scan key. When the scanned tag is a new tag number,
the V-Scan asks if the current tag number must be overwritten. This will only be the case if the
"Auto Create" setting is switched off (otherwise a new record is created instead of overwriting the
current).
VP5002-300PM-00GB-V-Scan
Viewing the records and deleting the database. When the data
type Batch nr is an item in the template, management of batch
scanning can be done (Set active, adding, deleting, renaming
and viewing of batches). The name depends on the given
Template Name.
Management of templates (Set active, adding, deleting, viewing
of templates).
When Scan only option is selected, tag-numbers are not
stored, but the full tag information is displayed.
field name
first added data type (key item)
value
Manual version 2.7 / Page 6