pipe is long. A prop stand must be
installed
4.9ft~6.6ft/1.5m~2m
(about 3.9in/10cm)
New house es should have this test
regulations.
The air conditioner shou ld use a separate power
0.12in/3mm
of above 10mA shall be used in the fixed
65.6ft/20m
27
signal wiring to avoid cross-disturbance.
The installation bearer of the sensing
device rotates to the another side, and
thenremoves the cover of the electrical
box. (Takeoff the electrical box if the
capacity is18000btu/h or when using
network function.) (Refer to Fig.50-10)
All the pictures in this manual are for
illustration purposes only. They may
differ slightly from the air conditioner
you purchased(depending on model).