Advertisement
Please connect the pipe with PVC bond primer and
glue and ensure there is no leakage.
Do not impose any pressure on the connecting
part of drainpipe.
The downward gradient of the drain pipe should be
over 1/100. Do not bend the drain pipe.
Refer to the figures on pipe right for the installation.
Make the duct is as short as possible due to the
low static pressure (nearly 0 PSi/0 Pa) of this unit.
Fix the installation board on the duct outlet with
the accessory bolts. If the bolt is ensure that,
the length of bolt is
Fix the duct on the installation board with a rivet.
See Fig.48
at the place where it is easy to remove.
If installing this unit in a meeting room or such
places, please equip the interior with a liner
and muffler.
a service provider for other requirement.
condensation
65.6ft/20m
23
4.9ft~6.6ft/1.5m~2m
(3.9in/10cm)
Advertisement
