Table of Contents
Advertisement
Table of Contents
Safety First ���������������������������������������������������� 2
Introduction ���������������������������������������������������2
Thank You from All of Us at McIntosh ��������3
Make a Note �������������������������������������������������� 3
Experts Standing By ������������������������������������� 3
Unpacking �����������������������������������������������������3
Speaker Placement ���������������������������������������� 4
Assembling The XRT1.1K ���������������������������4
Installation ����������������������������������������������������5
Prepare the Speaker Wire ..............................5
Single Amplifier Connection .........................5
Multiple Amplifier Connections....................5
Less Resistance ..............................................5
Making It Glow ..............................................5
Part Numbers for Packing Material ��������������6
Cleaning and Care ����������������������������������������� 6
Packing it Up �������������������������������������������������6
What's Inside ������������������������������������������������7
More About Line Array ��������������������������������7
The Crossover Network ��������������������������������7
Driver and Port Locations �����������������������������8
Dimensions ���������������������������������������������������9
Specifications ���������������������������������������������� 10
Directional Label .......................................... 4
Attaching Mid/Tweeter Column ................... 4
Opening Input Terminal ............................... 5
Tightening Input Post ................................... 5
Jumper Cable ................................................ 5
Power Control Connection............................ 6
Array Packaging ........................................... 6
Power Control Jack ....................................... 6
Woofer Column Packaging ........................... 6
Driver and Port locations .............................. 8
Dimensions ................................................... 9
Thank You from All of Us at McIntosh
You have invested in a precision instrument that will
provide you with many years of enjoyment. Please
take a few moments to familiarize yourself with
the features and instructions to get the maximum
performance from your equipment.
Make a Note
For future reference, you can write your serial
number and purchase information here. We can
identify your purchase from this information if the
occasion should arise.
Serial Number:
Purchase Date:
Dealer Name:
Experts Standing By
If you need further technical assistance, please
contact your McIntosh Dealer who may be more
familiar with your particular setup including other
brands. You can also contact us at McIntosh with
additional questions or in the unlikely event of
needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone : (607) 723-3512 (Technical Assistance)
Phone: (607) 723-3515 (Customer Service)
Fax: 607-724-0549 (Customer Service)
support@mcintoshlabs.com
Website: mcintoshlabs.com
Copyright 2018 © by McIntosh Laboratory, Inc
Unpacking
Each Loudspeaker comes in two boxes (for a
total of four boxes for a pair). The main speaker
column is VERY HEAVY. Take care and do not
move this VERY HEAVY speaker column alone.
Please have sufficient help to safely handle this
substantial investment. Your McIntosh Dealer is
quite experienced in such installations and is a
recommended resource for this task. Either way,
please use caution and care in handling these
speakers.
To remove the speaker column from the carton:
•
Remove banding that is holding boxes in place.
•
Place the large speaker box on its back so that
the top of the box can be lifted off. (This is how
the box was sitting on the shipping pallet.)
•
Remove the top of the box by lifting upward.
•
Remove the parts box and other pieces such as
this manual, leaving packing material in place.
•
Carefully, roll the carton over so that the open
side is on the bottom, preferably on a carpet or
other soft surface.
•
Lift the box up and off the speaker column.
•
Remove the packing material from the speaker's
base.
•
Carefully lift the XRT1.1K up so that it rests on
its base.
•
Remove remaining packing material.
•
You may choose to place the speaker in its
intended location before attaching the Tweeter/
Midrange Driver Column.
3
Advertisement
Table of Contents
