Remote Control Preparation - LG APNW48GTA0 Owner's Manual

Remote control preparation

How to mount onto a wall
1
Use the screws to secure the holder to the
wall or attach the holder side of indoor
unit.
2
To insert the remote control to the holder.
How to insert batteries
1
Remove the cover from the back of the re-
mote controller.
- Slide the cover according to the arrow di-
rection.
2
Insert two batteries.
- Be sure that the (+) and (-) directions are
correct.
- Be sure that both batteries are new.
3
Re-attach the cover.
- Slide the cover into back position.
- Do not use rechargeable batteries such bat-
teries are different from standard dry cells in
shape, dimensions, and performance.
- Change the batteries with a new one if the
remote control does not work properly after
using for an extended period of time.
CAUTION
!
• When not using remote controller for a
long time, flowing of dry cell liquid may
cause the failure of product, therefore,
remove all dry cells.
• When replacing dry cell (AAA), replace
two of them all with new ones, and if re-
mote controller is not operated properly
even after replacing the dry cells (AAA),
request the service.
• Do not disassemble or re-charge the
used dry cells, and do not throw away
those at the location with heat of fire or
hot air. There will be the danger of ex-
plosion.
11