Wireless Remote Controller - LG APNW48GTA0 Owner's Manual

PRODUCT INTRODUCTION
10

Wireless remote controller

1
2
3
7
8
10
12
Control
No.
panel
1 Remote controller operation lamp
Power ON/OFF button : Operation will
5
2 start when this button is pressed, and
4
stop when the button is pressed again.
6
Indoor fan speed button : To select the
3
desired fan speed.
9
4 Temperature setting button
11
A
5 Cooling button
13
B
6 Heating button
Dehumidification button : Can effectively
D
7 remove humidity when at the time of
rainy season or high humidity.
Auto operation button : Auto heating and
C
8 cooling operation is conducted in accor-
dance with setting temperature.
9 Fan mode button
Air flow direction button(Up/down,
10 Left/right) : Adjust air flow direction verti-
cally or horizontally.
Power cooling/heating mode button :
11 Powerful cooling/heating are performed
within short time
ON/OFF timer setting button : Set the
12
time of starting or stopping
13 Timer cancel button
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- The remote control signal can be received at a distance
of up to about 7 meters.
- Be sure that there are no obstructions between the re-
mote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, or next to a heating unit, or other heat
source.
Description