Table of Contents
Advertisement
The next diagram shows the same configuration as the previous illustration.
You can see that one output of the multiswitch is connected to the input of the
Combiner, and that there are no devices such a splitter or DishPro adapter in the
common cable run between the Combiner and Splitter. If a DishPro adapter is
needed, it must be installed after the Splitter as shown.
WITHOUT DISHPRO ADAPTER:
COMBINER
COMMON
CABLE RUN
SPLITTER
RECVR/TUNER
SIRIUS
RECEIVER
14
MULTISWITCH
RECVR/TUNERs
WITH DISHPRO ADAPTER:
COMBINER
COMMON
CABLE RUN
SPLITTER
RECVR/TUNER
SIRIUS
RECEIVER
Home Signal Distribution Kit Installation Guide
MULTISWITCH
RECVR/TUNERs
Advertisement
Table of Contents
