Table of Contents
Advertisement
Before Multiswitch Configuration
This configuration is only used when the multiswitch is not located on the roof.
In this configuration the SIRIUS signal and the satellite TV signal are combined
on one common cable on the roof. The combined signal is then carried from the
roof to the multiswitch where the signal is split back into separate signals before
the multiswitch. The benefit of the SIRIUS Combiner/Splitter in this installation is
avoiding having to run an additional cable for the SIRIUS radio from the roof to
the interior of the home.
The following illustration shows the installation of the Combiner/Splitter before
the multiswitch.
ComBIneR
C
Common
CaBle RUn
SPlITTeR
S
The next diagram shows the same configuration. Note that in the common cable
run between the Combiner and Splitter, there are no devices such a splitter or
DishPro Adapter.
10
SaTellITe DISH
oUTDooR anTenna
TV
TV
m
mUlTISWITCH
SaTellITe RaDIo
TV
Home Signal Distribution Kit Installation Guide
Adapter
Cable
Advertisement
Table of Contents
