Performing S-Seek Function - Sirius Satellite Radio Xact XTR1 Instruction Manual

Performing the S-Seek Function
Whenever you turn your satellite radio on, it automatically searches the incoming signal to determine if a
match exits between the signal and the artist/composers or song titles that you have recorded in memory
(except when S-seek is set to Off).
1. Press and hold the
2. Press and release the
3. Two selectable options displayed on the screen.
4. Select "Off" (to deactivate the programs searching) or "On" (to activate the program searching) by using
the or button, then press
Category 12:00P
Deleting the Recorded Programs (Artist/Song)
1. Press and hold the
2. Press the or button to scroll through programs.
3. Press the button to enter the sub-menu.
4. Press the or button to select Delete.
5. Press the button again to confirm the setting.
Category 12:00P
button. The recorded programs lists is displayed.
button while in S-seek mode.
button to confirm the setting.
Memory Recall
Delete
S-Seek
button. The recorded programs list is displayed.
Memory Recall
Delete
S-Seek
S-Seek
On
Off
Category 12:00P
Delete
Yes
No
Category 12:00P
19 19