Search Modes (Category, Channel, Artist, Song); Direct Tuning - Sanyo SIRIUS STILETTO 10 User Manual

Search Modes (Category, Channel, Artist,
Song)
The CRSR-10 has four ways to search for and select
music: by category, by channel, by artist, and by song
title.
Searching Categories
If you want to listen to a different entertainment
category, push the CAT. button up or down to activate
the Category Select Screen (top right):
1. Use the CAT. button to scroll through music and
entertainment categories.
2. When the category (ex. Rock) you want is
highlighted, use the CHANNEL Button to search
available channels within the category.
• Pressing the DISP button while in the Category
search mode will change the display between
Channel Name, Artist Name, and Song Title
enabling you to preview what is playing on other
channels before selecting.
3. When the channel you want is highlighted, press the
SELECT Button. The channel will change and the
display will revert to the Default Screen for the new
channel. To exit this mode without changing to a new
channel, press and hold the DISP button for 2-seconds.
14
Searching Channels (Channel List Mode)
It is possible to search for a different channel
while listening to your current channel. Be sure
that the display shows the Default Screen prior
to executing the following steps:
1. Press and hold the DISP button for 2-seconds
to activate the Channel List Screen (top right).
The Channel List Screen will appear, showing
all available channels regardless of category:
• Pressing the DISP button while in the
Channel List Screen will change the display
between Channel Name, Artist Name
(middle right), and Song Title (bottom right).
You can use this feature to search for a
specific Artist or Song that may be playing at
the time.
2. Press the CHANNEL Button up or down to find
the channel you want.
Sanyo CRSR-10 User Guide
3. Press and release the SELECT Button to select the
channel. To exit this mode without changing to a
new channel, press and hold the DISP button for 2-
seconds.
Press and Hold the
DISP button to enter
the Channel List
Mode
Press DISP again to
show the Artist Name
Press DISP again to
show the Song Title
Press DISP again to go
back to Channel List
Sanyo CRSR-10 User Guide

Direct Tuning

Channels can also be directly accessed by
pressing and releasing the SELECT Button while
in the Default Screen and using the 0-9 number
keys to numerically enter the desired channel
(below). Once the desired channel number has
been entered, press the SELECT button and the
channel will change and the display will revert to
the Default Screen for the new channel.
Note: The CRSR-10 will change immediately if
three numbers are entered (ex. "0", "0", "7"), but if
just one or two digits are entered, the unit will
change to that channel 4-seconds after the last
number was entered or immediately if you press
the SELECT Button.
001 Channel Name
Enter Channel
# _ _ _
Category 12:00P A
15