Table of Contents
Advertisement
Memory (MEMO) and Song Seek (S-SEEK)
Functions
This feature allows you to capture and store the
current Artist & Song title with a total of 10 listings
(10 Artist/Song Title combinations). The unit also
has the capability to search the current incoming
SIRIUS signal and alert you when a saved song
is being played.
Storing Song Titles
1. While the CRSR-10 is in the Default display mode,
momentarily pressing and releasing the MEMO
button stores the current program data information
within the CRSR-10's memory. A memory
"Stored" pop-up screen, followed by "X Used/Y
Empty" will each appear for 1 second (below).
2. If the MEMO button is pressed to save a currently
playing selection, and all of the memory spaces
are full, Memory Full (right, top left) will flash on the
18
display for 1-second, followed by a pop-up screen
presenting the Replace-Cancel (below, top right)
options. This prompt allows you to make the
following Replace/Cancel choices:
• By selecting Replace, the memory list will
appear (below, bottom left) , and you can use the
CHANNEL Button to select the information that
you would like to overwrite with the new Artist
Name/Song Title. After highlighting the selected
title in the list, press the SELECT Button to
delete the stored Artist Name/Song Title, and
replace it with the updated information. The
display will show the "Stored" screen (below,
bottom right).
• By selecting Cancel, the prompt screen would
disappear and revert to the original screen.
Sanyo CRSR-10 User Guide
Viewing Song Titles Stored into Memory
1. Press and hold the MEMO button for 2 seconds to
enter S-Seek Mode. The song titles stored
memory information (one at a time) will be
displayed on the LCD screen in page format.
Press and hold the MEMO button again for 2
seconds to exit S-Seek Mode.
2. Use the CHANNEL Button to scroll through the 10-
page listing and view the information. This
function allows you to recall information regarding
the Artist Name and Song Title for your own
personal review.
Deleting a Song Title Stored into Memory
1. Press and release the SELECT Button while in S-
Seek Mode results in a pop-up screen displaying
two selectable options - "Delete" and "S-Seek"
(top right).
Sanyo CRSR-10 User Guide
2. Press the CHANNEL Button to highlight the
"Delete" option.
3. Press the SELECT Button and a Delete
confirmation screen will appear.
4. To permanently delete the Song Title from your list,
select the "Yes" option using the Channel Button
and press the Select Button in to confirm (below ).
19
Advertisement
Table of Contents
