Managing Calls; Multiple Call Appearances; Using Speakerphone; Putting A Call On Hold - Motorola CN620 User Manual

Managing Calls

Multiple Call Appearances

While on an active call, you can make additional
calls:
1 Place a call as you would normally.
2 Press A under New Call.
3 Enter the second phone number you want to call
or press A under Contacts to select the number.
s
4 Press to place the call.
5 After the second call is connected you can switch
between the 2 calls with the navigation dial and
s
press .
Your CN620 phone supports multiple call
appearances allowing up to 4 calls in the WLAN
network and 2 calls in the GSM cellular network.
Calls on
Hold
Active Call

Using Speakerphone

Turning on speakerphone makes incoming sound
come out of the phone's speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
With the Flip Open
To turn speakerphone on or off:
t
Press .

Putting a Call on Hold

1 While on an active call, press H .
2 If you want to make the call active again, press
H

Muting a Call

Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
1 To mute a call, press
2 If you want to make the call active again, press
M
.
Multiple Call Appearances
M
.
23