Belkin F6C1000-EUR, F6C700-EUR, F6C1400-EUR User Manual page 21

P73335u_UPS_man.qxd
Replacing Battery (continued)
The Regulator PRO
replace batteries. If batteries are in poor condition, follow the proper
procedure for battery replacement.
6-1 Notice
• When replacing batteries, always use the same type as the
previous one.
• Do not dispose the battery or batteries in a fire as they may explode.
• Do not open or mutilate the battery or batteries as released electrolyte
is toxic and harmful to skin and eyes.
• A battery may present a risk of electric shock and high short circuit
current. The following precaution should be observed when
replacing batteries:
• Remove watches, rings, or other metal objects.
• Use tools with insulated handles.
6-2 Battery Replacement Procedures
1. Hold the top of the front panel, tilt it out and pull it carefully away
from the chassis.
2. Loosen the bottom of the front panel from the chassis and place it on
the top of the UPS. Be cautious so as not to pull the ribbon cable and
touch the LED printed circuit board.
3. Use a Phillips screwdriver to remove and open the battery door.
4. Carefully and smoothly pull the battery out of the UPS.
4/30/01 12:19 PM Page 17
NetUPS Series provides a convenient and easy way to
™
Step 1
Grasp and tilt out
and down
Step 2
Place the front
panel above
Step 4
Pull battery out
17
Step 3
Use a Phillips screwdriver
to release the battery door
En