2.
Refer to Figure 3 and attach the vent mount to a heating/air conditioning vent in your
vehicle. Position the two tension springs a against a vent louver B. Then push the vent
mount into the vent, far enough so that the hooks C drop down and hook the rear of the
vent louver (Figure 4). Once you are sure that the hooks have grasped a vent louver, the
tension springs A will keep the vent mount hooked to the louver.
[
]
1
Installation
PUSH
A
B
D
figure 3
figure 3
HOOKED
figure 4
figure 4
C