Battery Life; Winter Hibernation; Replacing The Battery - Landxcape LX790 Owner's Manual

Hide thumbs Also See for LX790:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
protective gloves before touching the blade turning disc .
TM
First, flip your Landxcape
upside down to expose its underside. Here
you will see the blade disc, the chassis, and the front wheel and driving
wheels. Clean everything thoroughly with a soft brush or moist rag.
WARNING: NEVER clean the underside of Landxcape
running water. Component damage can occur. (See Fig. O1,
O2)
Rotate the blade disc to ensure it rotates freely. Check the blades spin
freely around the fixing screws. Remove any obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause
a crack in the blade disc. Even the tiniest crack can decrease
TM
your Landxcape
's mowing output.
C. Clean the contact pins and the charging strips
Clean the contact pins located on the charging base and the charging
TM
strips located on Landxcape
using a cloth. Remove any built up
grass clippings or debris around the contact pins and charge strips
TM
periodically to ensure Landxcape

8.3 Battery life

TM
The heart of Landxcape
is its 20V Li-Ion battery. For proper storage of
the battery, make sure it is fully charged and kept in a cool dry place.
NOTE: The recommended Landxcape
0
between 0-55
C.
TM
The life-span of Landxcape
's battery depends on various factors,
such as:
The length of the mowing season in your region
TM
Amount of hours Landxcape
Battery maintenance during storage
TM
Landxcape
can be charged manually without the boundary
wire.
1.
Connect the charging base to a suitable power supply. The
green light on the charging base will turn on.
2.
Manually dock Landxcape
TM
Landxcape
is powered off. (See Fig. P)
3.
The green light on the charging base will be flashing.
TM
Landxcape
will begin to charge.

8.4 Winter hibernation

TM
Your Landxcape
will live longer and healthier if it is allowed to
hibernate. So even though it is troublesome, we recommend storing
TM
your Landxcape
in your shed or garage during the winter.
Before you prepare your Landxcape
recommend you:
Thoroughly clean your Landxcape
Fully charge the battery and remove it from Landxcape
Turn power off
To maximize the battery life, fully charge the battery and remove it from
TM
Landxcape
before storage during winter.
WARNING: Protect the underside of Landxcape
water. NEVER store Landxcape
The boundary wire can be left in the ground but its ends should be
protected, such as placed in a tin can with grease. If the charging base
is left outside for the winter, leave the boundary wire connected.
TM
NOTE: When bringing Landxcape
hibernation, make sure the charging strips and contact pins are clean.
We recommend using a fine grade emery cloth to clean the contacts.
EN
TM
with
successfully charges each time.
TM
operation temperature is
mows per day
TM
into the charging base while
TM
for winter hibernation, we
TM
TM
TM
from
TM
upside down outdoors.
back to work after winter

8.5 Replacing the battery

WARNING: Power off before attempting any adjustment,
replacement or repair.
Before replacing the blades, turn your Landxcape
protective gloves.
If you need to replace the battery, follow these steps:
TM
1. Gently turn your Landxcape
2. Remove the screws on the battery cover. Remove the battery cover.
(See Fig. Q1)
3. Lift out the old battery carefully. Press the latch and release the
connectors. (See Fig. Q2)
NOTE: Do not pull by the cables. Hold the connectors and release the
latch.
4. Connect a new original battery by attaching the connectors until
they click into position. (See Fig. Q3, Q4)
5. Fit the battery as shown. (See Fig. Q5) Place the cover back in its
position and tighten the screws.
TM
OFF and put on
upside down.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx791Lx793Lx792

Table of Contents