Table of Contents
Advertisement
Activating your SIRIUS Subscription
Before you can listen to the SIRIUS service, you
need to subscribe to the SIRIUS Satellite Radio
service.
1. Be sure that the Receiver is correctly installed
and that the antenna is oriented to receive the
SIRIUS signal.
2. Press the power button to turn Receiver On.
After displaying the SIRIUS logo, the Receiver
will update the SIRIUS channel line up. The
display will show, "UPDATING CHANNELS" and
show the status of the update.
U
P
D
C
Wait until the channel updates have completed
before pressing any buttons on the Receiver.
3. Once the channels have been updated, the
display will change to "Call 1-888-539-SIRIUS to
Subscribe" and will place you in SIRIUS Satellite
Radio's Preview Channel, channel 184.
You will not be able to tune to any other
12
H
s
X X
channels until you activate your SIRIUS
subscription.
C
a
4. To listen to the audio from your Receiver, you will
need to tune the FM radio in your vehicle and the
FM transmitter in the Receiver to the same FM
frequency. The FM transmitter in the Receiver
defaults to 88.1 MHz, so you can begin by tuning
your FM radio to 88.1 MHz. If there is an FM station
broadcasting on that frequency, you will have to
search for a quiet frequency to use. Refer to the
%
section titled, FM Transmitter in this User
Manual for instructions on how to tune the FM
transmitter to other FM frequencies.
5. Press and hold the SELECT button on SV1 or
press and release the MENU button on the
remote control to display the SIRIUS ID menu
option. Press and release SELECT again to
display your Receiver's unique 12-digit SIRIUS
l
l
1
-
8
SV1 Receiver User and Installation Guide
8
8 -
5
Advertisement
Table of Contents
