Programming The Energy Saving Programme - Jacobs Douwe Egberts Professional Cafitesse 500 Operating Instructions Manual

1 2 3 Position 2
PROGRAMMING THE ENERGY
SAVING PROGRAMME
During the energy saving pro-
gramme the heating of the boiler
is switched off (e.g. when the
dispenser is not used for a lon-
ger period).
The cooling system remains on.
Keep in mind that the boiler
needs a certain time for heating
up after the energy saving pro-
gramme has finished.
The water cock must remain open.
Turn the key switch to position 2.
Series 03
05.01
1 2 3 4
36
Press the 'Mode' button (1) until the
display shows "EN S". After 1 sec. the
beginning of the energy saving
programme is displayed. (fig. 36)
To change the adjustment:
Press button (2) = + or (3) = -
Press the 'Mode' button (1) and
"EN E " will be displayed.
After 1 sec. the end of the energy
saving programme is displayed.
(fig. 37)
Position 2
37
To change the adjustment:
Press button (2) = + or (3) = -
To finish programming, turn the key switch
to the neutral position and remove it.
Press the ON/OFF (4) switch to stop
the energy saving programme for one
period. In this case the delivery of
beverages will not be interrupted.
(fig. 37)
Operation
23