Wiring And Cable Connections - Sirius Satellite Radio SIR-ALP10T Installation Manual

Wiring and Cable Connections

B C
A Antenna Input (SMB)
B Ai-NET Output Connector (BLACK)
C
Ai-NET Input Connector (GRAY)
D
DATA Connector (BLACK)
E Power Connector
8
A
DATA
D E
Antenna Input
Connect the right-angle SMB connector
from the antenna. Push firmly to attach.
Ai-NET Output Connector
Use the supplied Ai-NET cable to connect
to the Alpine Headunit or Audio Processor –
See "System Connection Examples" for
more specific details.
Ai-NET Input Connector
Connect to optional Alpine audio equipment
like CD Changers - See "System
Connection Examples" for more specific
details.
Power Harness Connector
After the wiring connections are complete,
plug the wiring harness into the connector.
Make sure to insert firmly to lock the
connector in place.
1 2
3 4
1 ACC (Ignition Switched)
- Used in standalone navigation system
applications (no audio headunit)
2
Battery (+)
3 Ground (-)
4 No Connection
SIR-ALP10T Installation Guide