Viewing Traffic Speed and Flow Icon
Information
When you have set the system to display
traffic speed and flow icons on the map
display (discussed previously), the icons
are displayed in several shapes and colors
to indicate traffic speed.
Audio Headunit Messages
These messages vary by headunit model. Consult your Alpine headunit owners manual for
more information.
LOADING - Indicates that the SIR-ALP10T is acquiring audio and/or program information.
UPDATING or CALL 1-888-CALL SIRIUS TO ACTIVATE - This message appears when
the SIR-ALP10T is receiving a subscription update or during a channel or category update.
NO SIGNAL or NO SIGNAL or ACQUIRING - Will be displayed when there is a weak or
no antenna signal present.
ANTENNA or ANTENNA ERROR - Will be displayed if the antenna is damaged or
disconnected.
Navigation System Messages
CHECK ANTENNA - The antenna is not connected to the SIR-ALP10T. Check the antenna
cable to be sure it is securely attached to the unit.
UPDATING CHANNELS - This message appears when the SIR-ALP10T is receiving
channel mapping updates.
SIR-ALP10T Installation Guide
SIR-ALP10T Operation and Installation Guide
Icon
Red Square
Yellow Diamond
Green Dot
Traffic incident icons and detailed
information is available for all reported
incidents.
Speed
0-10 mph
0-20 km/h
10-45 mph
20-90 km/h
45+ mph
90+ km/h
21
21