Table of Contents
Advertisement
Follow these detailed cable installation instructions:
1.
Use a plastic putty knife or similar tool to lift the rubber molding around the windshield
and tuck the antenna cable underneath it.
2.
Continue tucking the cable underneath the windshield molding around the windshield to
the lowest corner.
3.
At the lowest corner of the windshield, route the cable out of the windshield molding and
into the rubber weather stripping around the door opening. Lift the weather stripping
from the opening and tuck the cable inside it, then replace the weather stripping. Run
the cable inside of the weather stripping to the bottom of the door opening.
4.
Pull the cable out of the weather stripping at the bottom of the door opening and route it
under the carpet toward the dashboard. Coil any excess cable in a hidden location, such
as under the carpet, keeping it away from any vehicle pedals or controls. Secure the
excess cable with wire ties.
2. Continue Tucking Cable
Under Molding To
Bottom of Windshield
3. Route Cable Out of Molding
and Into Weatherstripping
Around Door Opening.
Continue to Bottom of
Door Opening.
4. Bring Cable out from
Weatherstripping and
Route Under Carpet.
Figure 5
Figure 5
1. Route Cable
Under Rubber
Molding Around
Windshield
5. Bring Cable Out to
SIRIUS Radio
Location
[
Installation
]
Advertisement
Table of Contents
