Table of Contents
Advertisement
5.
Bring the end of the cable out at the SIRIUS radio location. Leave yourself enough cable
so you can easily connect it to the antenna connector of the SIRIUS radio or vehicle
dock.
SUV/Mini-Van Antenna Cable Routing Procedure
Figure 6 shows how the antenna cable should be routed from the antenna to your SIRIUS
radio in an SUV or a Mini-Van.
1. Feed Cable Under
Rubber Seal Around
Hatch Opening
Follow these detailed cable installation instructions:
1.
Feed the antenna cable underneath the rubber weather stripping of the rear tailgate
window/door and route the cable along the rear hatch. Lift the weather stripping from
the opening and tuck the cable inside it, then replace the weather stripping. Pull the
cable out from weather stripping and route it into the cabin under the interior trim. Avoid
hinges or gears that could crimp or cut the cable.
2.
Route the cable through the SUV's main cabin area under the interior trim, towards the
front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck
the cable under underneath. Avoid side airbag locations on back pillars and above the
[
]
10
Installation
2. Route Cable Under
Interior Trim, into
Cabin and Towards
Front of Vehicle
Figure 6
Figure 6
4. Bring Cable Out To
SIRIUS Radio
Location
3. Route Cable
Under Carpet
to Dashboard
Advertisement
Table of Contents
