Table of Contents
Advertisement
doors. (Airbag locations are marked with "SRS" logos.) Be careful not to crimp or cut
the cable.
3.
Bring the cable out from the trim near the firewall and route it under the carpet toward
the dashboard or console. Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable
with wire ties.
4.
Bring the end of the cable out at the SIRIUS radio location. Leave yourself enough cable
so you can easily connect it to the antenna connector of the SIRIUS radio or vehicle
cradle/dock.
Convertible Antenna Cable Routing Procedure
Figure 7 shows how the antenna cable should be routed from the antenna to your SIRIUS
radio in a convertible.
1. Bring Cable from
Antenna Into Inside
of Trunk Lid
2. Tape Cable Along
Inside of Lid to
Hinge Strut
Follow these detailed cable installation instructions:
6. Bring Cable Out To
SIRIUS Radio
Location
3. Tie Cable to Hinge Strut, Allowing
Slack for Lid to Open and Close.
Route Cable Into Cabin
Through Existing Wire
Channel.
Figure 7
Figure 7
5. Bring Cable out from
Trim and Route Under
Carpet to Dashboard
or Console.
4. Route Cable from Trunk
Under Interior Trim, into
Cabin and Towards Front
of Vehicle
[
Installation
]
11
Advertisement
Table of Contents
