PDS33 Series
The PDS33 solar pump controller must be installed into a control box which has a
tight enclosure to avoid direct sunshine,rain, dust, moisture, animals, plants, etc. The
control box should have a bottom gland plate for installing wire cord or conduit. To
decide the size of control box, Please refer to the following Figure 4.
隔热
导流板
Figure 4Ventilation Arrangement and Required Distances
3.2 Electrical Installation
3.2.1 Terminals
The following are typical figures of terminal blocks.
Note: Terminals are different in shapes and combinations, depending on different sizes
of PDS33 Solar Pump Controllers.
- 20 -