・
Withdraw the mains plug!
・
First aid
・
Maximum permissible length of cut
・
Direction of chain travel
・
Chain oil
・
Chain brake released
・
Chain brake applied
・
Prohibited!
・
Only for EU countries
Do not dispose of electric equipment
together
material!
In
observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting lumbers and logs.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Vibration
The
vibration
total
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
with
household
of
the
European
on
Waste
Electric
Equipment
and
environmentally
compatible
noise
level
determined
) : 90.8 dB (A)
pA
) : 101.8 dB (A)
WA
value
(tri-axial
vector
2
) : 5.2 m/s
h
2
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
waste
For European countries only
and
EC Declaration of Conformity
its
Makita declares that the following Machine(s):
Designation of Machine:
Chain Saw
Model No./ Type: UC3050A, UC3550A, UC4050A,
UC4550A, UC3051A, UC3551A, UC3550AP, UC4051A,
UC4551A
Specifications: see "SPECIFICATIONS" table.
ENE085-1
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
ENF002-2
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The
No.5514056.14005
The
EC-Type
performed by:
ENG905-1
DEKRA Testing and Certification GmbH
Enderstraße 92b
01277 Dresden
Germany
Identification No. 2140
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
ENG900-1
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 101.9 dB (A)
sum)
Guaranteed Sound Power Level: 103 dB (A)
6
EC-Type
Examination
Examination
per 2006/42/EC
ENG901-1
ENH030-5
Certificate
was