Troubleshooting - Bissell POWEREDGE 81L2 Series User Manual

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet
before performing maintenance or troubleshooting.
Problem Possible causes
Vacuum
Power cord not plugged in
cleaner
Blown fuse/tripped breaker
won't turn
on
Dirt Tank is full
Dirt Tank is not installed properly
Separator Grill is not installed
properly
Clog in vacuum
Vacuum
cleaner has
low suction
Separator Grill is clogged with
debris
Foot is loose
Filters need replacing
Dirt Tank is full of debris
Filter is missing or installed
Visible dirt
incorrectly
escaping
Dirt Tank installed incorrectly
from
vacuum
Separator Grill is missing or
installed incorrectly
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Remedies
Check electrical plug
Check/replace fuse or reset breaker
Empty Dirt Tank
Position container correctly and
snap firmly into place
Position Separator Grill in Upper
Tank and twist firmly into place
Follow instructions on page 8 to
clear clog
Remove and wipe Separator Grill of
all debris
Make sure foot is fully inserted into
body of unit
Visit www.BISSELL.com or
call 1-800-237-7691 to order
replacement filters
Empty Dirt Tank
Check filter for correct installation
Position container correctly and
snap firmly into place
Position Separator Grill in Upper
Tank and twist firmly into place
www.BISSELL.com
9