Mul-t-lock ENTR Quick Start Manual page 13

THE USE OF OTHER THAN SUITABLE, GENUINE MUL-T-LOCK® COMPONENTS
MAY CAUSE SEVERE DAMAGE TO THE PRODUCT, AND WILL VOID THIS LIMITED
WARRANTY. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE
TRANSFERRED IN ANY WAY AND MAY NOT BE EXTENDED, ALTERED OR VARIED.
TO THE FULLEST EXTENT ALLOWABLE BY THE LAWS APPLYING HERETO, THIS LIMITED
WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY EXCLUDED
AND DISCLAIMED. MUL-T-LOCK® WILL NOT BE LIABLE FOR LOSS OF PROFITS,
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHICH PURCHASER
MAY SUSTAIN, OR PUNITIVE DAMAGES, EVEN IN THE EVENT OF NOTICE OF THE
POSSIBILITY OF SUCH DAMAGES.
Some Basic Instructions and Requirements for Correct Use of ENTR® Products
Protection of Keys:
• Keys should be used only for their original purpose, of operating the corresponding
cylinder.
• Your key carries a code. Make sure you keep it concealed.
• Only genuine Mul-T-Lock® key blanks should be used.
• Duplicate keys must be performed by an authorized Mul-T-Lock® locksmith on
Mul-T-Lock®'s key cutting machine.
• Keys must be inspected periodically and must be replaced when show physical
wear.
Cylinders:
• Installation must be performed by an authorized Mul-T-Lock® dealer only.
• Cylinders must not be submerged in water, or exposed to any chemical wash, or
be painted.
• Protect the cylinder from dirt & dust.
• Protect your cylinder from exposure to extreme temperatures. (External -20 C to
+80C, Internal -10C to +50C).
• The cylinder's keyway should be lubricated at least once per year (preferably
using lubricants authorized by Mul-T-Lock®, or light machinery oil). In any heavy
use environments, extreme weather conditions, lubrication must be conducted
every three months.
hanges.indd 13 16-Aug-17 18:14:5