Remove Pads - Electronic Parking Brake - McLaren MP4-12C Maintenance Manual

Instructions
FG03 Chassis / C02 Parking Brake System / Parking Brake System / AA-RM-03C02-01-001 - Remove/install pads - Electronic parking brake
Preparation work
1. AA-RM-02A04-04-007 Secure/lift vehicle on lifting platform.
2. AA-RM-03B03-01-001 Remove/install wheels.

Remove pads - Electronic parking brake

Care The electronic parking brake is
Point: inoperative when this sequence is
carried out.
Care Before mechanical work on
Point: Parking Brake components you
must set callipers in fully open
position.
1. Connect McLaren Diagnostic System, proceed
to Diagnostic Toolbox within Electronic
parking brake (EPB).
2. Access Sequences section.
3. Carry out EPB Calliper Open.
4. Remove pin securing clips (1).
5. Remove pad pins (2) and anti rattle clip (3).
6. Remove electronic parking brake pads.
71