To Disassemble/Assemble The Hose Reel, Pw 350, Pw 360; To Disassemble/Assemble The High Pressure Hose, Pw 350, Pw 360 - Husqvarna PW 345C Workshop Manual

2.10 To disassemble/assemble the
hose reel, PW 350, PW 360
1. Remove 4 torx TX20 screws to remove the telescopic
handle.
2. Remove 2 torx TX20 screws from the rear side.
3. Remove the hose reel from the cabinet.
12 – English
2.11 To disassemble/assemble the
high pressure hose, PW 350, PW 360
1. Remove the torx TX20 screw and the u-pin.
2. Remove the hose router.
Repair instructions