Specifications - Snapper LT-200 Series Operator's Manual

ENGINE:
Briggs & Stratton
Make Briggs & Stratton®
Model Intek, 4195 Series
Displacement 30.5 cu in. (500 cc)
Electrical System Alternator : 9 amp
Battery: 12 Volt, 195 CCA
Oil Capacity 48 oz (1,4 L)
CHASSIS:
Fuel Tank Capacity Capacity: 3.5 Gallons (13,2 L)
Rear Wheels Tire Size: 22 x 8.0 -8
Inflation Pressure: 10 psi (0,68 bar)
Front Wheels Tire Size: 15 x 6.0-6
Inflation Pressure: 12-14 psi (0,82-0,96 bar)
Power Rating
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with
SAE J1995. Torque values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060
RPM for all others; horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.
BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air cleaner installed whereas gross
power values are collected without these attachments. Actual gross engine power will be higher than net engine
power and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
the wide array of products on which engines are placed, the gasoline engine may not develop the rated gross power
when used in a given piece of power equipment. This difference is due to a variety of factors including, but not limited
to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due
to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
engine.
Parts & Accessories
Contact an authorized dealer for details.
TRANSMISSION:
K46
Type Hydrostatic Tuff Torq K46
Hydraulic Fluid 10w 30 Premium Engine Oil
Speeds Forward: 0-5.5 MPH (0-8,9 km/h)
@ 3400 rpm Reverse: 0-3.0 MPH (0-4,8 km/h)
Continuous Torque 170 ft-lbs (230,5 Nm)
Output
DIMENSIONS:
Overall Length 70.9" (180 cm)
Overall Width 48" (122 cm)
Height 44.9" (114 cm)
21

Specifications