288 IN CASE OF EMERGENCY
Exterior Bulbs
Headlamp
Fog Lamp – If Equipped
Front Side Marker, Park/Turn Signal
Rear Tail, Stop, Turn Signal Lamp
Center High-Mounted Stop Lamp
Backup Lamp
License
NOTE: All of the interior bulbs are glass wedge base or
glass cartridge types. Aluminum base bulbs are not ap-
proved and should not be used for replacement.
Replacing Exterior Bulbs
Headlamps
1. Raise the hood to access the rear of the headlamp
housing.
2. Slide the red lock tab rearward on the connector, then
depress the tab and remove the connector from the bulb.
3. Twist the headlamp bulb and pull the bulb from the
headlamp housing.
Bulb Number
PSX24W
3757A or PY27/7W
LED (Serviced at authorized dealer)
LED (Serviced at authorized dealer)
4. Install the new headlamp bulb and twist until locked
into the headlamp housing.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.
5. Connect the wiring connector to bulb and slide red lock
tab forward.
H11LL
3157
168