Maintenance & Cleaning - Panasonic ES518 Operating Instructions Manual

Maintenance
Cleaning
Push the foil cassette release but-
ton and detach the foil frame as
shown. (See Fig. 3)
Grasp inner blade firmly at each
side, and pull straight up. (See
Fig. 4)
Clean away the clippings with the
cleaning brush provided. (See
Fig. 5)
Reassemble the shaver parts in
the reverse order.
Replacing shaving
head components
With daily use, the outer foil may
need to be replaced once every
12 months and the inner blade
every 2 years.
Replacing the outer foil
(WES9933)
Squeeze the foil cassette release
buttons and lift the outer foil up-
ward to remove it.
Insert the new outer
foil
(See Fig. 3)
Press down until the outer foil
snaps into place.
(See Fig. 3)
Replacing the inner
blade (WES9932)
Fig. 4)
Remove the inner blade by grasp-
ing it firmly at both sides and pull-
ing straight away from the shaver.
Inserting the new inner
blade
(See Fig. 4)
Hold the inner blade at both sides
and guide it onto the inner blade
mount. Press it firmly into the
mount until it snaps in place.
Caution
Do not wash with water.
CIt may damage the shaver.
Do not leave the shaver where
the temperature is below 0°C
(32°F) or above 40°C (104°F),
where it will be exposed to
direct sunlight or a heat source,
or where there is much mois-
ture.
Do not wipe the shaver body
using anything other than mild
soapy water.
CIt may alter the color of the
shaver.
Do not use the shaver if it has a
damaged foil and/or blade, as in-
jury can result.
Use this shaver for its intended
use, as described in this manual.
5
(See