Blocking Of The Rotor; Stopping Machine - B.W. Machinery GBK130 User Manual

turn, the button is released and you can restart the machine (see Fig.15).

4.4 Blocking of The Rotor:

The rotor may be blocked due to blunt blades, incorrect usage of emergency button
while chipping, machine not completely emptied before stopping the engine, or
engine has stopped due to overloading of the chipper with too much branches and etc.
Please follow the steps below to unblock the rotor.
 Switch off the engine, and remove the feeding chute.
 Remove the yellow cover from the bearing housing by loosening the two bolts.
(see Fig.16).
 Turn the rotor shaft in anti-clockwise direction.(see Fig.17)
 Use a branch or a stick to remove any blocked materials in the drum. Do not use
your hands.

4.5 Stopping Machine:

Make sure the machine is completely emptied before stopping the engine (otherwise
rotor may be jammed when using it for next time).
GBK130 Series Manual Book V1.01
B.W. Machinery
7